Best Roof Measuring Software for 2026: 10 Options Compared by Use Case

Roofr is the fastest route from a street address to a signed proposal. The free Starter plan orders measurement reports for $19 each, and the first paid plan, Measure+ at $109 a month, drops reports to $13 with delivery in as little as two hours. Measurements flow straight into branded proposals with e-signatures, invoices and payments, so a rep can quote in the driveway instead of back at the office.

The catch is that reports are always an extra charge, even on paid plans, and the cheapest way to run the whole business — proposals, payments and CRM — is Essentials at $249 a month. Add-ons such as the Instant Estimator and Roofr Sites cost extra. Buy Roofr when you want measuring and selling in one tool; buy EagleView when the report itself must carry an insurance claim.

EagleView built the aerial measurement category, and insurers and adjusters argue with its reports least. A Bid Perfect report costs $18 and covers squares and dimensions for a quick bid; Premium reports run $32.75 to $87 for a residential roof depending on size and tier, with commercial reports from $89.50. Its imagery comes from EagleView's own aircraft, not satellites, with independent testing at 98.77% accuracy on roof lines.

The trade-off is cost at volume: no subscription bundles reports. Ordering dozens of Premium reports a month becomes a real budget line, and the EagleView One subscription and Platinum tier are priced by quote. Turnaround runs from same-day to three days depending on the report. Buy EagleView when the measurement must stand up in a claim; buy Roofr or RoofSnap when speed and a low per-job cost matter more.

RoofSnap suits the estimator who likes to trace the roof themselves. Pay-as-you-go Half Snap reports start at $13 and Full Snaps run $35 to $55 by roof size, while the monthly subscription costs $105 per user and adds unlimited draw-it-yourself measurements, estimating, material orders, contracts and payments. Reports arrive in about four hours, with a 30-minute rush option.

The subscription is priced per user, so a five-person crew pays five times the single-user rate, and annual billing drops the per-user price to $52 to $78 depending on team size. Coverage can be patchy in rural areas where the imagery library is thinner. Buy RoofSnap when you want to draw your own measurements and turn them into a proposal in the same tool; buy EagleView when you want a fully done-for-you report.

HOVER is the only tool here that measures a roof from photos taken on a phone. Walk the property snapping pictures, and HOVER builds a measured 3D model of the whole exterior — roof, siding, windows and doors — with no drone or ladder. Roof-only scans cost $29, $49 or $69 by complexity on the free Starter plan, and the first three projects are free.

Pro costs $999 a year and takes $20 off every project, so a simple roof scan drops to $9; Business at $2,999 a year charges flat per-scan rates. Every project is still billed per scan, even on Pro, and photographing a property takes 15 to 30 minutes of careful work. Buy HOVER when you sell exterior remodels and the 3D visualization closes the deal; buy an aerial report when you only need roof numbers.

iRoofing flips the pricing model: instead of paying per report, you pay a flat subscription and measure as many roofs as you like. The monthly plan costs $149 a month for three users, with $124 a month on a six-month term and $107 on a 24-month term, and every plan includes unlimited do-it-yourself measurements from satellite, blueprint or drone imagery, plus $75 of HD imagery credit a month.

The same subscription adds a shingle visualizer that shows homeowners their own house in new roofing, an instant estimator and a proposal generator, so the measurement becomes a sales presentation. Standalone perimeter reports cost $10 with no subscription. The HD imagery is metered, so heavy users watch the credit balance. Buy iRoofing when you measure more than a dozen roofs a month; buy a per-report tool when you measure only a few.

GAF QuickMeasure is the fastest cheap report in this list. Single-family reports cost $18 for GAF Master Elite contractors and $20 for everyone else, with no subscription and no GAF certification required to order. Most single-family reports arrive in under an hour, and every report includes a bill of materials and an editable 3D rendering that can be ordered through ABC Supply.

GAF warrants the measurements at about 95% accuracy and replaces a report free within 30 days if it falls short, which is below the detail of a premium EagleView report. Multi-family reports cost $54 to $60 per building, and there is no Xactimate export, so insurance work needs manual entry. Buy QuickMeasure when you need one fast, cheap report; buy EagleView when the claim needs a deeper report.

RoofScope sells CAD-reviewed aerial measurement reports, with a person checking the drafting before delivery. Plans run $89 to $279 a month, and a standard residential report costs $39.95 pay-as-you-go. Reports cover roofs, gutters and siding, arrive within 12 hours on most plans, and include detailed line-item measurements for edges, hips, valleys and flashing.

The membership model takes some learning: the monthly fee acts as a prepaid deposit that goes toward report purchases, with unused funds rolling over. Xactimate export is available on the Growth plan at $199 a month and above, and the entry plan's 24-hour turnaround is slower than Roofr's two hours. Buy RoofScope when you want a human-reviewed report for a complex roof; buy Roofr when two-hour delivery matters more.

AccuLynx is the full roofing business system, not just a measuring tool. Pro and Elite cover leads and CRM, estimates and contracts, invoicing, scheduling, job costing and supplier ordering, and both plans order EagleView and RoofScope measurements inside the job file, so the measurement never leaves the workflow.

Pricing is by custom quote, per user license, after a demo — AccuLynx dropped its $250-a-month Essential plan in August 2026, so there is no published entry price to compare. Nine features, including texting, SmartDocs and subcontractor logins, are paid add-ons. Buy AccuLynx when an established company needs one system for the whole job; buy Roofr when a smaller crew wants published prices and a free start.

DroneDeploy is the choice when the roof must be flown, not just looked up. The Individual plan costs $4,188 a year, about $349 a month, for one pilot, with automated flight planning, cloud processing, orthomosaics and 3D models from up to 3,000 images per map. AI analysis flags issues in the captured imagery, and the platform works across construction and energy as well as roofing.

The entry price is steep for a roofer who only inspects roofs, and it covers one admin user only, so a team needs a quote-only plan. You also need the drone and a pilot, and the monthly billing rate is not published — annual billing is the printed price. Buy DroneDeploy when you already fly drones and want the mapping standard; buy an aerial report service when you never want to fly.

Pix4D is the survey-grade photogrammetry engine in this list, built for measurements that must survive an engineering review or a dispute. PIX4Dmatic Standard costs $3,990 a year, about $333 a month, and turns drone, mobile or LiDAR captures into orthomosaics, 3D models and point clouds with full control over every processing parameter.

Note the product change: PIX4Dmapper, the classic desktop tool, stops being sold on January 1, 2027, and Pix4D is steering buyers to PIX4Dmatic at the same $3,990-a-year Standard price. The learning curve is steep compared with one-click measurement tools, and the cloud product is a separate subscription. Buy Pix4D when accuracy and an audit trail matter most; buy RoofSnap or Roofr when a quick measurement is enough.